2Freestanding Wood Stove & Venting

A typical through-the-ceiling installation with a factory-built Class A chimney.

FREESTANDING WOOD STOVE & VENTING Side cross-section of a typical through-the-ceiling installation with a Class A factory-built chimney Chimney cap (rain cap) Storm collar Roof flashing Attic insulation shield Ceiling support boxfirestop at the ceiling Stove pipe / connector*single- or double-wall Clearance tocombustibles* Hearth pad /floor protection* Class A chimney pipe*insulated, listed to UL 103HT Attic insulation Flue collar Wood stove (listed appliance) Glass door * Clearances to combustibles (stove, connector, chimney), hearth pad size and material, and chimney height above the roof vary by listing and code. Verify with NFPA 211 / IRC R1001–R1003 / Oregon Residential Specialty Code and the manufacturer's installation manual. Simplified educational illustration — not to scale and not an installation guide.
Tap or click the diagram to open it full size.

Parts glossary

Chimney cap (rain cap)
Listed cap that keeps rain and debris out of the chimney; often includes a spark screen.
Storm collar
Band clamped around the chimney pipe just above the flashing that sheds water off the flashing joint.
Roof flashing
Metal flashing (boot) that seals the roof where the chimney pipe passes through.
Class A chimney pipe* (UL 103HT)
Factory-built, insulated all-fuel chimney listed to UL 103HT; installed only with the same manufacturer’s listed parts.
Attic insulation shield
Metal shield that keeps attic insulation and debris away from the chimney to maintain its required clearance.
Attic insulation
Ceiling insulation in the attic; must be kept back from the chimney by the shield.
Ceiling support box (firestop)
Listed box at the ceiling that supports the chimney, maintains clearance to framing, and acts as the firestop where it passes through the ceiling.
Stove pipe / connector* (single- or double-wall)
Pipe connecting the stove’s flue collar to the chimney; it is a connector, not a chimney, and may be single-wall or double-wall.
Flue collar
The outlet on top (or back) of the stove where the connector attaches.
Wood stove (listed appliance)
Freestanding wood-burning heater; installed per its listing label and manual.
Glass door
Sealed door with heat-resistant ceramic glass for viewing the fire.
Clearance to combustibles*
Required air space between the stove (and connector) and walls, furniture, or other combustible materials.
Hearth pad / floor protection*
Noncombustible floor protector under and around the stove that provides the ember and/or thermal protection the stove’s listing requires.

Verify with code / manual *

Verify with NFPA 211 / IRC R1001–R1003 / Oregon Residential Specialty Code and the manufacturer’s installation manual and listing.